Part Number Hot Search : 
AT24C MB950EF MT130 1N6319 GT125 1N5248 BFX30 630204
Product Description
Full Text Search
 

To Download DS1411DB-9 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 DS1411
Serial Port iButton TM Holder
www.dalsemi.com
FEATURES
Small size, true-ground interface to an RS232 COM Port for reading and writing iButton devices Works with bipolar logic signals of 5V to 12V (RS232C) as well as unipolar signals of 5V to 12V Supports reading and writing at regular and Overdrive speeds Provides strong pullup to 5V for Temperature iButton, Crypto iButton and EEPROM iButton Communicates at data rates of 9.6k (default), 19.2k, 57.6k and 115.2k bits/s Powered entirely from an RS232 interface Standard DB female connector for mating to the COM Port of a computer with DS9098 iButton Retainer for a single iButton or MicroLAN Cable (DS1402x)
ORDERING INFORMATION
DS1411 DB-9 Connector
DESCRIPTION
The DS1411 is a sophisticated RS232 to 1-Wire TM adapter and iButton holder which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with an adequate TMEX software driver it enables an IBM-compatible PC or laptop computer to directly read all and write any non-EPROM iButton devices. The DS1411 has a DS9098 retainer for a single F5 MicroCan and can replace the DS9097U-009 in applications that use only a single iButton. Multiple iButtons can be connected using standard MicroLAN Cables and button holders (see DS1401 and DS1402x data sheets). 1-Wire communication is supported by the adapter for regular as well as Overdrive speed. The serial port must support a data transmission rate of 9600 bits/s. Under software control, the adapter can be set up for RS232 data rates of 19200, 57600 and 115200 bits per second. The two higher rates are recommended for communication at Overdrive speed with Overdrive capable devices. Since the DS1411 operates in a byte mode, every data byte received from the RS232 port generates eight time slots on the 1-Wire bus. The DS1411 is based on the DS2480 Serial 1-Wire Line Driver chip and therefore is not a plug-in replacement for the DS1412 Serial Port Adapter. The RXD/ TXD Polarity Select input of the DS2480 is tied to VDD (non-inverting). 1 of 1 071299


▲Up To Search▲   

 
Price & Availability of DS1411DB-9

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X